Elcometer 107 Cross Hatch Cutter

Home
Adhesion
Elcometer 107 Cross Hatch Cutter

Home
Cross Hatch/Cross Cut Method
Elcometer 107 Cross Hatch Cutter

Elcometer 107 Cross Hatch Cutter

Price:

$385.00

Weight:

1.00 LBS

Shipping:

Calculated at checkout

Product Description

Link: Datasheet PDF | Instruction Manual

The Elcometer 107 Cross Hatch Cutter provides an instant assessment of the quality of the bond to the substrate. Due to its rugged construction this gauge is ideal for thin, thick or tough coatings on all surfaces. An ideal field or laboratory test.

Robust design
Large, non slip grip
Ideal for thin, thick or hard coatings
A quick change, 4 sided cutter allows adhesion testing on a wide range of coating thicknesses (1mm, 1.5mm, 2mm and 3mm)

The Elcometer 107 Cross Hatch Cutter is available as a Basic or Full Kit.

Technical Specification

Part Number	Description	Coating Thickness
F10713222-1	Elcometer 107 Basic Kit (6 x 1mm)	0 - 60µm	0 - 2.0mils
F10713348-6	Elcometer 107 Full Kit with ISO Tape (6 x 1mm)	0 - 60µm	-
F10713348-1	Elcometer 107 Full Kit with ASTM Tape (6 x 1mm)	0 - 50µm	0 - 2.0mils
F10713222-2	Elcometer 107 Basic Kit (11 x 1mm)	0 - 50µm	0 - 2.0mils
F10713348-2	Elcometer 107 Full Kit with ASTM Tape (11 x 1mm)	0 - 50µm	0 - 2.0mils
F10713222-3	Elcometer 107 Basic Kit (11 x 1.5mm)	-	-
F10713222-4	Elcometer 107 Basic Kit (6 x 2mm)	0 - 125µm	0 - 5.0mils
F10713348-9	Elcometer 107 Full Kit with ISO Tape (6 x 2mm)	0 - 120µm	-
F10713348-4	Elcometer 107 Full Kit with ASTM Tape (6 x 2mm)	50 - 125µm	2.0 - 5.0mils
F10713222-5	Elcometer 107 Basic Kit (6 x 3mm)	121 - 250µm	-
Certificate available	Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. Accredited Certificate: can be issued for Fixed Calibration Equipment and a full UKAS traceable certificate is issued from an independent Calibration Laboratory.
Packing List	Basic Kit: Robust handle, cutter, hexagonal wrench, presentation storage case and instructions (together with Classification of Adhesion Test Results chart)
Packing List	Full Kit: Robust handle, cutter, hexagonal wrench, instructions (together with Classification of Adhesion Test Results chart), eye glass, brush and adhesive tape (either ASTM or ISO tape), all in a plastic ABS carry case

Can be used in accordance with:
AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, NF T30-038

Standards in grey have been superseded but are still recognised in some industries

(Click Accessories Number to purchase)

T99913700-1	Elcometer 107 Cutter (6 x 1mm)
T99913700-2	Elcometer 107 Cutter (11 x 1mm)
T99913700-3	Elcometer 107 Cutter (11 x 1.5mm)
T99913700-4	Elcometer 107 Cutter (6 x 2mm)
T99913700-5	Elcometer 107 Cutter (6 x 3mm)
K0001539M001	Adhesive Tape (1 roll) ASTM D 3359
K0001539M002	Adhesive Tape (1 roll) ISO 2409	T9999358-	Adhesive Tape (2 rolls) ISO 2409