Elcometer 130 SCM400 Salt Contamination Meter

Loading... Please wait...

Elcometer 130 SCM400 Salt Contamination Meter

Price:

$5,900.00

SKU:

E130----1

Weight:

12.00 LBS

Shipping:

Calculated at checkout

Product Description

Links: Technical Specification | Accessories | Data Sheet | Instruction Manual

Soluble salts on a surface are absorbed into a special filter paper soaked with distilled water. The Elcometer 130 measures the conductivity of the wet paper, calculates the salt level and displays it in ug cm¯² .

Suitable for a wide range of shapes, orientations and surfaces and finishes
Quick and simple to use
Battery operated and portable
Confirms adequate cleaning of surfaces before coating, aiding the prevention of premature coating failure
Shows salt build-up on vulnerable surfaces which can be cleaned to increase the lifetime of a coating
Test papers can be re-moistened and a similar test result can be achieved - ideal for proof and ISO requirements
Accurate
Repeatable
Reproducible

Each instrument is supplied in a convenient light weight carry case and includes:

100 High Purity Sample Papers
250ml Pure Water
8 Replacement Plate Support Pads
20 PVC Storage Bags

Disposable Gloves
Tissues
3 x 2 ml Syringes
Plastic Tweezers

Test method:

The Elcometer 130 SCM400 Salt Contamination Meter has been designed to be very repeatable and accurate.

In order to achieve this accurate result, as with all salt test equipment, care should be taken to avoid contamination by touch.

Using the gloves and plastic tweezers, remove one of the sample paper discs
Fill one of the syringes with distilled water and carefully allow the sample paper to absorb the correct amount of water (as described in the operating instructions)
Place the water filled sample paper onto the substrate under test, using the tweezers to gently push the paper into the metal profile.
Press the green button on the Elcometer 130 and wait for the alarm to indicate that the testing time is complete
Using the tweezers, place the sample paper onto the central section of the Elcometer 130 (See Below), close the lid and press the green button again
Read the salt value on the display.

Place the sample paper onto the test area - depicted by the red circle in the picture.

Range	0.1 - 20µg cm¯²
Resolution	0.1µg cm¯²
Accuracy	±1%
Operating Range	5 to 40ºC (41 to 104ºF) <80% RH
Power Supply	9V Battery 6LR61 (MN1604)
Sampling Time	2 minutes
Sampling Size	11cm (4.3") circle or part of this
Weight	1.5kg (3.3lbs)
Dimensions (nominal) Instrument Only	200 x 190 x 60mm (7.9 x 7.5 x 2.4”)
Number of tests before battery change	approximately 500 measurements
Model	Description	Part Number
Elcometer 130	Elcometer 130 Salt Contamination Meter	E130----1
Accessories	250ml Pure Water	T13011344
	100 High Purity Sample Papers	T1304469-
	Medical Wipes (1 Pack)	T1304472-
Packing List	Elcometer 130 SCM400 Salt Contamination Meter, Carry Case and nylon Shoulder Strap, High Purity Sample Papers (pack of 100), Plastic Tweezers (2 off), Self-Seal PVC Bags (pack of 20), Replacement Pressure Support Pads (pack of 8), Disposable Gloves (pack of 20) in nylon holdall, Pack of Tissues, 9V Alkaline Battery, 2ml Syringes (3 off), Bottle of High Purity Water (250ml), Plastic Sample Bottle & Operating Instructions