Elcometer 211 Coating Thickness Gauge

Home
Coating Thickness Gauges
Elcometer 211 Coating Thickness Gauge

Home
Mechanical Thickness Gauges
Elcometer 211 Coating Thickness Gauge

Elcometer 211 Coating Thickness Gauge

Price:

$399.00

Weight:

1.00 LBS

Shipping:

Calculated at checkout

Product Description

Link: Datasheet in PDF | Instruction Manual

The Elcometer 211, commonly referred to as the “Banana Gauge”, has proven to be a successful coating thickness gauge where the use of electronic instruments is difficult, e.g. inflammable atmospheres in oil and gas production.

The “V” grooved base, rubber feet and clear scale, with its ranges for thicker coatings, make this one of the most popular mechanical gauges in the world.

Factory calibrated - with user calibration adjustment
Foils supplied to check calibration on site
Ideal for cold surfaces and underwater use
Small and portable with an accuracy ±5%

Technical Specification

Part Number	Description	Range
A211F--1M	Elcometer 211 Coating Thickness Gauge	0 - 1000μm
A211F--8M	Elcometer 211 Coating Thickness Gauge	0.65 - 6mm
A211F--1E	Elcometer 211 Coating Thickness Gauge	0 - 40mils
A211F--8E	Elcometer 211 Coating Thickness Gauge	25 - 250mils
Accuracy	±5% of the reading or ±2.5μm/0.1mil (whichever is the greater)
Substrate Thickness	0.4mm (16mils) minimum
Measurement Area	30mm (1.18”) Diameter minimum
Measurement Diameter	20mm (0.8”) minimum
Edge Effects	Must be at least 6mm (0.24”) from edge
Dimensions	200 x 60 x 30mm (7.8 x 2.4 x 1.2”)
Certificate available	Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability
Packing List	Elcometer 211, calibration foil set, carry pouch, neck harness and operating instructions

Can be used in accordance with:
AS 2331.1.3, AS 3894.3-A, ASTM G 12, ASTM B 499, AS/NZS 1580.108.1, BS 5411-11, BS 3900-C5-6A, DIN 50981, ISO 2178,
ISO 2808-6A, ISO 2808-7A, NF T 30-124, SSPC-PA2