| Part Number | Range at 25°C (77°F) | Cup Type | Cup Number |
Model | Orifice Diameter |
| K0002410M021 | 20 - 34cSt | Zahn Dip Cup | 1 | Elcometer 2210/1 | 2mm |
| K0002410M022 | 60 - 120cSt | Zahn Dip Cup | 2 | Elcometer 2210/2 | 2.7mm |
| K0002410M023 | 100 - 230cSt | Zahn Dip Cup | 3 | Elcometer 2210/3 | 3.8mm |
| K0002410M024 | 200 - 460cSt | Zahn Dip Cup | 3 | Elcometer 2210/3 | 3.8mm |
| K0002410M025 | 350 - 850cSt | Zahn Dip Cup | 4 | Elcometer 2210/4 | 4.3mm |
| K0002410M026 | 600 - 1600cSt | Zahn Dip Cup | 5 | Elcometer 2210/5 | 5.3mm |
| K0002410M021 | 20 - 34cSt | Shell Dip Cup | 2 | Elcometer 2310/2 | 2.4mm |
| K0002410M022 | 60 - 120cSt | Shell Dip Cup | 4 | Elcometer 2310/4 | 3.8mm |
| K0002410M023 | 100 - 230cSt | Shell Dip Cup | 5 | Elcometer 2310/5 | 4.6mm |
| K0002410M024 | 200 - 460cSt | Shell Dip Cup | 6 | Elcometer 2310/6 | 5.8mm |
| K0002410M022 | 60 - 120cSt | DIN Flow Cup | 4 | Elcometer 2350/2 | 4mm |
| K0002410M023 | 100 - 230cSt | DIN Flow Cup | 4 | Elcometer 2350/2 | 4mm |
| K0002410M024 | 200 - 460cSt | DIN Flow Cup | 4 | Elcometer 2350/2 | 4mm |
| K0002410M021 | 20 - 34cSt | ASTM/FORD Flow Cup | 2 | Elcometer 2531/2 | 2.53mm |
| K0002410M022 | 60 - 120cSt | ASTM/FORD Flow Cup | 3 | Elcometer 2531/3 | 3.40mm |
| K0002410M023 | 100 - 230cSt | ASTM/FORD Flow Cup | 4 | Elcometer 2351/4 | 4.12mm |
| K0002410M021 | 20 - 34cSt | ISO Flow Cup | 3 | Elcometer 2353/1 | 3mm |
| K0002410M022 | 60 - 120cSt | ISO Flow Cup | 4 | Elcometer 2353/2 | 3.95mm |
| K0002410M023 | 100 - 230cSt | ISO Flow Cup | 6 | Elcometer 2353/4 | 6mm |
| K0002410M024 | 200 - 460cSt | ISO Flow Cup | 6 | Elcometer 2353/4 | 6mm |
| K0002410M022 | 60 - 120cSt | DIN Frikmar Dip Cup | 4 | Elcometer 2434/2 | 4mm |
| K0002410M023 | 100 - 230cSt | DIN Frikmar Dip Cup | 4 | Elcometer 2434/2 | 4mm |
| K0002410M024 | 200 - 460cSt | DIN Frikmar Dip Cup | 4 | Elcometer 2434/2 | 4mm |
| K0002410M021 | 20 - 34cSt | ISO Frikmar Dip Cup | 3 | Elcometer 2437/2 | 3mm |
| K0002410M022 | 60 - 120cSt | ISO Frikmar Dip Cup | 4 | Elcometer 2437/3 | 4mm |
| K0002410M023 | 100 - 230cSt | ISO Frikmar Dip Cup | 6 | Elcometer 2437/4 | 6mm |
| K0002410M024 | 200 - 460cSt | ISO Frikmar Dip Cup | 6 | Elcometer 2437/4 | 6mm |
| Certificate available | Certificate of Calibration: issued for Fixed Calibration equipment and shows readings and traceability. | ||||
Loading... Please wait...Categories
Product Description
Link: Datasheet in PDF
In order to check the viscosity cup’s calibration or to certify it for ISO purposes, it is imperative that viscosity cup standard calibration oils are used.
Standard oils have a specific drain time, dependent upon the viscosity cup type (Ford, Shell, Zahn etc.) and the orifice or cup number used.
To check the viscosity cup, use the standard viscosity oils in place of the liquid and measure the drain time.
Specific calibration oils can only be used with specific flow and dip cups. Please use the table below to determine which calibration oil is required with each cup, or contact Elcometer. Viscosity oils are supplied in ½ litre (1 pint) bottles.
Technical Specification
Customers Who Viewed This Product Also Viewed
Proudly serving
